9
Malicious Call Identification (MCID)
If you have subscribed to this service, you can have a malicious call registered while it is in progress
by pressing the Foxkey followed by “5”.
The exchange registers the numbers of the calling subscriber, together with the date and
time of the call.
Calling Line Identification Restriction (CLIR)
If you are a subscriber to this service, you can suppress display of your number on the called party’s
telephone
before
you dial their number, by pressing the Foxkey followed by “6”.
Display for CLIR
If
the calling party has suppressed his number
, no
number is displayed (display blank)
Your number is suppressed only for the call you are about to make. Once the handset is
replaced, CLIR is switched off.
Automatic ring-back if busy
Automatic ring-back must be available for your connection and the called line must have an ISDN
connection.
You have dialled a number which is engaged, and want to call back as soon as the line is free.
Ring-back signal on the display indicates that you can use the
ring-back function.
Press the Foxkey followed by “7” to activate automatic ring-
back.
Replace handset. Display shows the symbol
Your telephone rings as soon as the called party’s line is free.
Lift the handset within 15 seconds to automatically make the
connection.
If you lift the handset without opting for automatic ring-back, the ring-back signal disap-
pears and the display returns to default mode.
A ring-back remains active for around 40 minutes, after which it is automatically
cancelled by the exchange.
Using the extended-feature functions
