21
Service functions
Displaying the software version
To check the software version for your telephone, press the Foxkey followed by “#” then “1”.
The software version is displayed. Press the END key to return
to default display mode.
Resetting the telephone to ex-factory setting
To clear all programmed data in your telephone, press the Foxkey followed by “#” then “3”.
Display message for clearing all programmed data. Press the
memory key to initiate the clearing procedure. Once all data
have been cleared the display returns to default mode (date
and time).
Note:
This procedure also clears all numbers stored in the speed-dialling memory.
Troubleshooting
Handset off-hook, no dialling tone, display blank
Ensure that the telephone connection cable is correctly plugged into the telephone and the tele-
phone socket.
Handset off-hook, busy tone only or no dialling tone
Unplug and re-insert the telephone connection cable .
Display blank
Your connection may be in emergency mode. Check the power at the mains socket.
Unplug and re-insert the telephone connection cable.
Important Information
