Operating Manual
SECTION 4
PROTEGE 5442P
15
112509 Rev G
Figure 7
3.
Lower the platform until the casters are on the ground and the base is raised about
5 inches [125 mm] off the ground. To do so, turn the barrel key in the setup key
switch on the front of the platform, then hold an operating switch ‘down’, OR use
the manual pump per Section 4, Operating the Lift Without Power.
Certain option packages (incl. universal key switches) require manual operation.
4.
Unplug the electrical cord and coil it inside the platform. The lift is ready to be
moved.
5.
Follow the setup instructions in Section 2 to prepare the lift for use in its new
location. The casters must be removed to allow lift operation.
CAUTION!
Stay clear of the edge of the platform floor while performing the following
step.
Summary of Contents for 5442P
