Ascension 5442P, Operating Manual

Page: 25 / 28

Operating Manual SECTION 5
PROTEGE 5442P
19 112509 Rev G
SECTION 5
Troubleshooting
If the lift will not operate after it has been set up as described in Section 2, check the
following:

The casters are removed and the lift is set up as described in Section 2.

The outlet has power.

The power cord is plugged in.

The reset button on the GFCI is pressed.

The disconnect switch on the lift cord is set to ‘ON’.

The on/off switch in the right machinery cabinet is set ‘ON’.

The lift is set up on a level surface (less than 5%).

Both gates are closed. The lift will not operate if either one of the gates is open.

The emergency stop button on the passenger's operating station is not activated.
Reset the emergency stop button if necessary.

The under-platform safety pan is hanging freely and evenly from the underside of the
platform. The lift will not operate if the safety pan is actuated.
If these conditions are satisfied but the lift does not operate, refer to the comprehensive
troubleshooting section in the Maintenance & Repair Manual . If the problem cannot be
resolved with the help of the Maintenance & Repair Manual , call Ascension.