Operating Manual
SECTION 4
PROTEGE 5442P
14
112509 Rev G
SECTION 4
Installing the Casters for Portability
1.
Plug the power cord into a grounded electrical outlet and use an operating switch
to move the platform upward at least 12 inches [305 mm].
2.
Remove all four casters from the left-hand machinery cabinet and install them into
the color-coded sockets located at the corners of the platform underside. See
Figure 6 and Figure 7. The rigid casters (marked yellow) must be oriented so the
lift will roll forward and backward. When correctly installed, the casters will not slide
out without being pulled straight down.
Figure 6
WARNING!
Always close and lock all access panels and remove all keys before leaving
the lift unattended.
WARNING!
Never leave the lift unattended while performing the following procedures.
Summary of Contents for 5442P
