Asante IntraCore 39240, User Manual

Page: 26 / 148

COMMAND> enable
Username : admin
Password : xxxxxx
Switch#
Command Purpose
COMMAND> enable Enters the privileged EXEC mode.
Switch# ? Lists privileged EXEC commands.
To return to user EXEC mode, use the
exit command.
To list the commands available in top mode, enter a question mark (?) at the prompt, as shown in the following
example. Enter a question mark (?) after a command to see all the options for that command.
Switch> enable
Switch# ?
cable-diag Proceed cable diagnostic
clear Command to clear switch configuration or statistics
configuration Enter into global configuration mode
copy Upload file from switch to host, or download file to
switch from host
exit Exit current shell
help Displays Help information
logout Exit current shell
ping Proceed ping destination host
reload Reboot System
save Save configuration
show Show configured data
telnet Telnet the other host
Important: To retain configuration changes after a system reload you must save changes made in running
configuration. From the privileged level, configurations can be saved using the save command.
26 Asante IntraCore IC39240/480 User’s Manual