manualshive.com logo in svg

Asante IntraCore 39240, User Manual

Share
Download
Asante IntraCore 39240 User Manual Download Page 11

 

1.3 Package Contents 

The following items are included in the switch’s package: 

 

•

 Switch 

•

 

AC power cord 

•

 

RS232 straight-through serial cable for management console port  

•

 

Rack mount brackets with screws 

•

 

IntraCore IC39240/480 CD-ROM 

Contact your dealer immediately if any of these items is missing.

 

1.4 Front and Back Panel Descriptions 

The following section describes the front and back panels of the IntraCore IC39240/480 Series switches. 

The front panel of the IntraCore IC39240/480 contains the following: power and port LEDs, 24/48 10/100/1000BaseT 
ports and 2/4 shared mini GBIC Ethernet ports. For information on LEDs refer to the following section in this chapter.  
A console port and power cord connector are on the back. 

 

39240 Front Panel 

 

Ethernet ports

Mini GBIC ports 

 

 

 

 

39240 Rear Panel 

 

 

11 

Asante IntraCore IC39240/480 

User’s Manual

 

 

Summary of Contents for IntraCore 39240





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands