Asante IntraCore 39240, User Manual

Page: 44 / 148

The default setting is no edge port configuration.
To return the switch to its default setting, use the following configuration command.
Command Purpose
spanning-tree port edge disable ports 1-2 Set port 1,2 to non edge port
Configuring Port Path Cost
Use the following interface mode command to configure port path cost:
Command Purpose
spanning-tree port cost 1000 ports 1-2 Set path cost of port 1,2 to 1000
The default values for path cost are determined by the operating port speed:
•
For ports operating in 1000Mb speed, the path cost is 20000
•
For ports operating in 100Mb speed, the path cost is 200000
•
For ports operating in 10Mb speed, the path cost is 2000000
To return the switch to its default setting, use the following configuration command.
Command Purpose
spanning-tree port cost 0 ports 1-2 Set path cost of ports 1,2 to default values
Configuring Port Priority
Use the following interface mode command to configure port priority:
Command Purpose
spanning-tree port priority 10 ports 1-2 Set priority of ports 1,2 to 10
44 Asante IntraCore IC39240/480 User’s Manual