Asada Beaver 4Eco, Instruction Manual

Page: 21 / 28

21
*The correction procedure is also given on the inside of the front cover.
(7)Install saw blade in order of [ Fig.8 ].
(8)Install saw blade referring to 1-1)Replacement the Saw Blade (5)-(7).
(9)Confirm the oblique cutting according to the procedure (1)-(4).
2)Correction Procedure for Oblique Cutting
Fig.11
(5)When there is a difference between top and bottom lengths, detach saw blade referring to 1-1)Replacement
the Saw Blade (1)-(3)
(6)Loosen the two Bolts of Blade Guide and the Lock Nut of Blade Guide Head, and turn the adjustment bolt
clockwise or counterclockwise to adjust the angle of the blade guide head.
When the top length is larger: Turn the adjustment bolt counterclockwise.
When the bottom length is larger: Turn the adjustment bolt clockwise.
*A half turn of the adjustment bolt allows adjustment of about 1.2mm.(For 4” pipe)[ Fig.11 ]
Always adjust the blade guides F and R to the same value.(After adjustment, always make sure that the end
of the adjustment bolt makes contact with the surface of the blade guide.)