Asada Beaver 4Eco, Instruction Manual

Page: 12 / 28

12
2.INSTALLATION
1)Carrying the Machine
2)Installation
-When lifting the machine, bend your knees to avoid a load on your waist.
-The machine with chip is slippery. Do not drop the machine on your feet while
lifting it.
-Always ground the machine to avoid electric shock or resultant death.
-Do not touch the plug with wet hands.
-Do not expose the machine to rain and water and do not use it in damp or wet
locations.Humidity will deteriorate motor insulation or lead to electric shock.
-Immediately replace Power Plug, Power Cord or extension cord, if damaged.
-An extension cord used should be a three-core cabtyre cable having an earth wire.
Use a thick and durable cord for outdoor use.
(1)Put the machine in a place free from moisture.
(2)Put the machine on a flat surface without play or on a flat work bench.
(3)Secure a sufficient space around the machine. A wide space is necessary particularly when working long
and heavy pipe.
(4)It is mandatory to use the Pipe Support for long and heavy pipe. Avoid excessive force applied to the
machine which causes it to tilt.
(5)Make sure that the power source is equipped with a ground fault circuit breaker to avoid electric shock.
(6)Use an earth clip when a power receptacle without a base for grounding is used.(*1)
(7)When an extension cord is used, use the one conforming to the applicable regulations.(*2)
-Never install an earth wire to the gas pipe.If attempted, explosion may take place.
-Do not use the machine in the presence of flammable liquids or gases such as
gasoline and thinner. Otherwise, ignition or explosion may take place.