Asada Beaver 4Eco, Instruction Manual

Page: 16 / 28

16
2)Setting the Workpiece(Chain Vise Type)
-Ease the saw blade toward a workpiece.
Do not hurry it down or force it in to avoid a machine failure, accident or injury.
-When a new saw blade is used, test cuts are required as it is liable to cut obliquely.
Cut a workpiece once or twice at the cutting load position “1”.
-Immediately after cutting, fragment are hot. Do not touch them directly with hands.
Wait for a while or hold the pipe with a cloth. Otherwise you may get burned.
(1)After cutting ends,removing the workpiece.
(1)Place the workpiece into contact with the vise V groove. Hold the chain
handle, chain the workpiece, grad the pin of the chain with the clamper,
and turn the clamp knob to tighten the workpiece. [ Fig.5 ]
The workpiece should be clamped securely without looseness.
3)Cutting
4)Removing the Workpiece
(1) To release the stopper, hold the grip, lift the frame, and turn on the switch.
(2) After making sure that the saw blade rotates steadily, lower the frame slowly to put the saw blade onto the
workpiece.
(3)At the end of cutting, the machine switches off automatically.
Fig.5