AS DH -N2 Series Operating Instructions Manual Download

Page: 17 / 44

AS Strömungstechnik GmbH

www.asstroemungstechnik.de

Version date: 09/2020

Materials (wetted components)

Characteristic

Value

Housing variants

Standard (natural): PE-HD, PVDF, PCTFE
Conductive: PP (black), PVDF (black), PFA (black), stainless steel

O-ring variants

Standard: Perfluor elastomer (Kalrez®)
As an alternative: FPM/FKM, EPDM

Ball valve

For PE-HD housings

• Standard: PP-H with FPM o-rings
• As an alternative: PP-H with EPDM o-rings, PP-H with Kalrez o-rings

For PVDF housings

• Standard: PVDF with FPM o-rings
• As an alternative: PVDF with EPDM o-rings, PVDF with Kalrez o-rings

Materials (non-wetted components)

Characteristic

Value

Anti-rotation clip

PVC (red)

o-ring on code
disk

Standard: FKM
As an alternative: EPDM, Kalrez®

Other components

Standard: PVDF,
As an alternative: PFA, on request

Connections

Characteristic

Value

Connection vari-
ants liquid

Flare: 3/8“, 1/2“, 3/4“, 1“, 1 1/4“
Hose connector: 1/2“, 3/4“, 1“
FNPT/MNPT: 1/2“, 3/4“, 1“
G-thread: 1/2“
Others on request (e.g. Tri-Clamp, Camlock, Pillar, Grundfos)

Connection
gas

QC2: NPT 3/8" female thread (since November 2018)
G-Series: NPT 1/2" female thread (since November 2018)
Optional adapters, e.g. Flare adaptors

Further information on the fill heads can be found in the corresponding data sheets.

Possible other versions are available on request.

Technical specifications

Summary of Contents for DH -N2 Series













































Search results

Summary of Contents for DH -N2 Series

Reviews:

Related manuals for DH -N2 Series

Brands by name

Popular brands

AS DH -N2 Series, Operating Instructions Manual

Search results

Summary of Contents for DH -N2 Series

Reviews:

Related manuals for DH -N2 Series

Brands by name

Popular brands