EN
AS Strömungstechnik GmbH
www.asstroemungstechnik.de
Version date: 09/2020
4
1 General information
1.1 Introduction
These operating instructions are only valid
for the products mentioned in the title.
The figures shown are only exemplary
illustrations. Depending on the equipment
and configuration, the actual appearance
of the fill head may vary.
These operating instructions convey im-
portant notes for the safe and efficient han-
dling of the products. They are part of the
products. The prerequisite for safe working
with the products is the compliance with all
specified safety instructions and directives.
The operating instructions refer to standard
versions. For special versions that are not
described in these operating instructions,
the basic information in these operating
instructions applies in conjunction with
additional special documentation.
The operating instructions are the basis for
all training courses that take place with the
products.
•
Please read the operating instructions
carefully before using the products.
•
Please read the safety instructions.
•
Store the operating instructions in a
safe and accessible place during the
service life of the products.
•
Pass the operating instructions to
any subsequent owner or user of the
products.
1.2 Conventions
In order to be able to optimally work with
the operating instructions, the following
clarifications on typographical conventions
must be observed.
List
•
Texts displayed in this way are bullet
points.
Handling instructions
1. Step 1 of the sequence of actions
2. Step 2 of the sequence of actions
3. Step 3 of the sequence of actions
The sequence of the work steps must be
adhered to.
Tip
»
Indicates general information and
recommendations.
General information
Summary of Contents for DH -N2 Series
Page 1: ...Operating instructions Translation Fill heads of the series QC2 G Series ...
Page 42: ......
Page 43: ......
Page 44: ......
