Information on how to work
13
Height adjustment of handlebar (H)
The handlebar can be locked in 3 positions.
1.
Press detent lever down.
2.
Move the handlebar to the desired position.
3.
Release the detent lever and engage the handlebar in
the desired position.
Choke (8)
Close the choke during cold start of the
engine.
Open the choke:
Push the lever inwards.
Close the choke:
Push the lever out-
wards.
Fuel valve (7)
2
1
1: Closed
2: Open
Information on how to work
Check the device for completeness, proper function, and
cleanliness before each operation. A dirty ventilation grid
causes overheating of the engine which can result in engine
damage. A dirty protective grid at the silencer poses a fire
hazard.
Frequent engagement and disengagement leads to in-
creased wear of the drive belt and components of the drive.
Especially engaging under load, e.g. in high grass, leads to
overload.
You will find further information on working in the respective
chapters of the attachment tools.
Special information, e.g. on ecological mowing and available
attachments, can be found on our homepage www.as-mo-
tor.com.
Prior to starting
Fuel
As fuel, use unleaded petrol (see operating instructions of the
engine manufacturer).
You can use E10 petrol. Do not store E10 petrol longer than
30 days.
Tanking up
Warning
Fuel is ignited by hot engine parts.
► Prior to filling up, switch off the engine and wait for at
least 20 minutes until the engine has cooled down. Ob-
serve the safety instructions regarding the fuel!
Filling up with fuel
1. For filling, use a canister with filler spout or a funnel.
2. Open the canister carefully so that existing excess pres-
sure is slowly reduced.
3. Open the tank cap carefully so that existing excess pres-
sure is slowly reduced and no fuel sprays out.
4. Fill the fuel tank.
5. Tightly close the tank cap again.
Checking the engine oil level
Attention!
Prior to each use, check the engine oil level (see
operating instructions of the engine manufacturer).