Safety instructions
10
When work is completed
After working, always close the fuel valve.
Prior to leaving the device, wait until the motor comes to a
standstill and pull off the spark plug connector.
After switching it off, let the device cool down for at least 20
minutes before you store it in a dry, closed, sufficiently ventil-
ated room.
Never place the device with petrol in the tank inside a build-
ing where petrol vapours may come into contact with open
flames or sparks.
Secure the attachment carrier and the attachment against un-
authorised use before leaving the device.
Use caution during maintenance and
repair
Only carry out work as described in these operating instruc-
tions. Have an authorised service centre perform all other
work.
Prior to all maintenance work, wait until the engine comes to
a standstill and pull off the spark plug connector.
We explicitly point out that, in accordance with the Product Li-
ability Act, we are not liable for damages that were caused by
our devices if
– worn or damaged parts were not repaired or replaced on
time.
– these damages were caused by improper repair.
– when changing a part, our original parts or parts authorised
by us were not used.
– the repair work was not carried out by an authorised ser-
vice station.
The same applies for spare parts and accessories.