Arturia PolyBrute, User Manual

Page: 81 / 112

To route VCO 1 to different filters for sounds A and B:
1. Enter Morph mode
2. Use [Assign 2] to enter Edit B
3. Press the filter routing button to route VCO 1 to the Ladder filter.
Now press [Presets] and turn the Morph knob. The VCO 1 filter routing LEDs will morph from
Steiner to Ladder routing, with both lit when the Morph knob is at its midpoint. This example
works on any patch.
10.5.1.1. Edit A
Use [Assign 1] to access and change the settings for sound A. Inside this mode you can:
• Change the values for any voice engine parameter except as noted here [p.77] .
• Set the levels that sound A will use for the shared mod routes. The Mods button
will light and you'll be taken to the Mod Matrix. Edit the level to the desired value.
10.5.1.2. Edit B
Use [Assign 2] to access and change the settings for sound B. Inside this mode you can:
• Change the values for any voice engine parameter except as noted here [p.77] .
• Set the levels that sound B will use for the shared mod routes. The Mods button
will light and you'll be taken to the Mod Matrix. Edit the level to the desired value.
10.5.1.3. Edit A+B
Use [Assign 3] when you want the parameters for sound A and B to have the same value.
Inside this mode you can:
• Change the values for any voice engine parameter except as noted here [p.77] .
• Set the levels that sounds A and B will use for the shared mod routes. The mod
source settings can still be different; just the mod amount and polarity will be the
same. The Mods button will light and you'll be taken to the Mod Matrix. Edit the
level to the desired value.
Arturia - User Manual PolyBrute - Morph Mode 75