Special Message Section
Specifications Subject to Change:
The information contained in this manual is believed to be correct at the time of printing.
However, Arturia reserves the right to change or modify any of the specifications without
notice or obligation to update the hardware that has been purchased.
IMPORTANT:
1. The product and its software, when used in combination with an amplifier,
headphones or speakers, may be able to produce sound levels that could cause
permanent hearing loss. DO NOT operate for long periods of time at a high level
or at a level that is uncomfortable. If you encounter any hearing loss or ringing
in the ears, you should consult an audiologist.
2. It is important that you read the included Safety Manual thoroughly and fully
understand the instructions.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a function or feature
works (when the product is operating as designed) are not covered by the manufacturer’s
warranty, and are therefore the owner's responsibility. Please study this manual carefully
and consult your dealer before requesting service.
Precautions include, but are not limited to, the following:
1. Read and understand all the instructions.
2. Always follow the instructions on the instrument.
3. Before cleaning the instrument, always remove the AC cable. When cleaning, use
a soft and dry cloth. Do not use gasoline, alcohol, acetone, turpentine or any other
organic solutions; do not use a liquid cleaner, spray or cloth that's too wet.
4. Do not place the instrument in an unstable position where it might accidentally
fall over.
5. Do not place heavy objects on the instrument. Do not place the instrument near
a heat vent at any location with poor air circulation.
6. Do not open or insert anything into the instrument that may cause a fire or
electrical shock.
7. Do not spill any kind of liquid onto the instrument.
8. Always take the instrument to a qualified service center. You will invalidate your
warranty if you open and remove the cover, and improper assembly may cause
electrical shock or other malfunctions.
9. Do not use the instrument with thunder and lightning present; otherwise it may
cause long distance electrical shock.
10. If Safeguard Fuse for internal AC input wire needs to be replaced, swap the fuse
with the following technical characteristics : F3.15A, 250v AC.
11. Do not expose the instrument to hot sunlight. The operating temperature range
of the instrument should be 15°-35° C (59°-95° F).
12. Do not use the instrument when there is a gas leak nearby.
13. Arturia is not responsible for any damage or data loss caused by improper
operation of the instrument.
Summary of Contents for PolyBrute
Page 1: ...USER MANUAL...
