Arturia PolyBrute, User Manual

Page: 26 / 112

3.2.6. Add Effects
The Effects section [p.78] can add motion and ambience to any patch. Even the initialized
patch can sound great! Simply raise the Modulation Intensity knob to add some chorus,
raise the Delay and Reverb levels to suit your tastes, and enjoy.
3.3. Save the patch
If you want to keep your new patch, there are several methods described here [p.46] . But if
you already know of an available preset location, hold
Save
and select that location with the
Matrix buttons. Instructions for naming the patch are here [p.47] .
3.4. That was only sound A...
As mentioned earlier, every preset is made up of two parallel sounds (A and B). The Morph
knob of an initialized preset points to sound A by default. If you're ready, turn the Morph
knob to B, go back to create a new patch [p.14] , and do it all again for sound B using different
values. Then set the Morph knob to the optimal position between A and B and save the
revised patch. The position of the Morph knob is stored with the patch.
20 Arturia - User Manual PolyBrute - Create a Patch