7.2. Mod source list
Row
MOD
source
Notes
A
VCF Env
Output voltage of the VCF envelope
B
Mod Env
Output voltage of the Mod envelope
C
Voices
Output voltage based on voice number
D
LFO 1
Output from LFO 1 (unipolar or bipolar, depending on the LFO setting)
E
LFO 2
Output from LFO 2 (unipolar or bipolar, depending on the LFO setting)
F
LFO 3
Output from LFO 3 (unipolar or bipolar, depending on the LFO setting)
G
Key / Seq
Triggers from the keyboard, the sequencer/arpeggiator, and incoming MIDI notes
H
Velocity
Output voltage based on MIDI velocity value
I
Aftertouch
Output voltage based on key pressure
J
Wheel + X
Output voltage of the Wheel summed with Morphée axis X (must assign the Wheel to
Matrix)
K
Y
Output voltage of the ribbon controller summed with Morphée axis Y
L
Exp 2 + Z
Output voltage of Expression pedal 2 summed with Morphée axis Z
7.2.1. What is the Voices source?
The Voices mod source provides certain values based on the voice number. As with any
source, it can be used on any parameter (VCO tuning, stereo position, filter cutoff, etc.), with
the modulation range set by the mod amount.
There are two settings for the Voices source, which are accessed by holding [Settings] and
turning the Stereo knob:
• Distrib Centered:
◦
Voice 1 sends a zero value
◦
Voice 2 sends a +1 value (maximum positive)
◦
Voice 3 sends a -1 value (maximum negative)
◦
Voice 4 returns to zero
◦
Voice 5 sends a +0.5 value (50% positive)
◦
Voice 6 sends a -0.5 value (50% negative).
• Distrib Gradual:
◦
Voice 1 sends a -1 value (maximum negative)
◦
Voice 2 sends a -0.6 value
◦
Voice 3 sends a -0.2 value
◦
Voice 4 sends a +0.2 value
◦
Voice 5 sends a +0.6 value
◦
Voice 6 sends a +1 value (maximum positive)
52
Arturia - User Manual PolyBrute - Working with Mods
Summary of Contents for PolyBrute
Page 1: ...USER MANUAL...
