8.3.3. SEQ home page
Enter Sequencer mode and press [SEQ]. You'll see the Sequencer mode home page, where
the Matrix view options and several track operations are found. Other pages are shown
temporarily while changing Sequencer mode settings, but the Sequencer returns to the
home page after 1 second.
8.3.3.1. View steps 1-32, 33-64
A sequence can contain up to 64 steps, which is more than the Matrix panel can display at
one time. Use [Assign 1 + 2] to switch the view between steps 1-32 and steps 33-64. You can
use this during playback, recording, or editing.
8.3.3.2. Notes: Overwrite/overdub, mute
[Assign 3] selects the Notes view in the Matrix panel, and also provides different options for
[Assign 7+8] than are shown in the Modulations view (see below).
• [Assign 7] toggles Record mode between Overwrite and Overdub.
• When not recording,
can temporarily mute the sequence note data.
• While recording, [Assign 8] becomes "Erase Current Step." Hold [Assign 8] and
press a step to erase it.
8.3.3.3. Modulations: Mod ID, Erase mods
[Assign 4] selects the Modulation track view in the Matrix panel, and also provides different
options for [Assign 5-8] than are shown in the Notes view (see above).
• [Assign 8] is alone on the right side if a mod track has not been recorded yet. It is
used to erase a mod track: Hold [Assign 8], press [Assign 5-7], and that mod track
will be erased.
• [Assign 5-7] show the names of the controls that are recorded on the three mod
tracks.
8.3.3.4. Mute the notes
In case you missed this
: When the sequence is not in a Record mode, the
[Assign 8] button (Toggle Mute) is active in Modulations view (even though you can't see it).
Use it if you want to hear what the Modulation tracks are doing while holding some keys.
60
Arturia - User Manual PolyBrute - Sequencer Mode
Summary of Contents for PolyBrute
Page 1: ...USER MANUAL...
