ARTURIA – ARP 2600 V – USER MANUAL
90
If you wish to bring more space to your sound, add a delay or chorus effect to
it. For this, click on the “Chorus” or “Delay” buttons situated on the toolbar,
open the grid on the left of the synthesizer. This holds the settings for these 2
effects. If you use delay, you can synchronize it with the MIDI tempo of your
host sequencer.
The “Chorus” and “Delay” settings
Don’t forget to save your new sound, as like the previous, it will be useful as a
template for other more complicated sounds.
6.3
Special effects patch with the help of the tracking
generator
With this example, you will discover a few of the many possibilities for
modulation with the tracking generator / LFO. This module is one of the major
additions to the ARP2600 V compared to the original.
Let’s again use the “bass1” sound as template for the following preset:
•
two oscillators (VCO1 and 2)
•
a low pass filter (VCF)
•
an amplifier (VCA)
•
the tracking generator connected to the filter
We will first see how to create a “complex LFO” modulation type on the filter
cut-off frequency with the help of the tracking generator.
On the tracking generator module (situated on the bottom right of the
synthesizer section), click on the “open tracking” button under this grid to open
it. Then, connect the output of the first tracking line ( “out”) to the “VCO2 Sin”
modulation input of the filter.
