ARTURIA – ARP 2600 V – USER MANUAL
55
(pre-cabled to the Sample and Hold clock) to create a composite source of
modulation.
The electronic switch
An example:
•
Connect the output of the square waveform of oscillator 1 to input A
and the sine output of oscillator 2 to input B.
•
Place these two oscillators to low frequency position (LF) so as to slow
the oscillation speed. Set the frequency potentiometers for the two
oscillators to 0.3 Hz.
•
Connect output C of the interrupter to one of the filter modulation
inputs.
•
Set the Sample and Hold clock speed potentiometer towards the
bottom to clearly hear the alternation between the two modulations.
Inputs (A / B): Audio or modulation signal input connection jacks.
Selector switch (C): Selector switch C connection jacks between signals A and B
External clock input (Ext clock In): External; clock connection jacks (pre-cabled to the
Sample and Hold clock)
4.1.10
Envelope follower
The envelope follower allows the generation of a modulation from an external
(or internal) source of audio signal. The (Pre amp.) volume parameter sets the
fineness of the envelope follow. The lower it is, the more closely the variations
of the input signal will be followed.
