ARTURIA – ARP 2600 V – USER MANUAL
53
The noise generator
Low pass frequency (White / Low Freq): Sets the cut-off frequency of the low
pass filter.
Noise volume: Sets the noise volume.
Noise generator output (Noise generator output): Noise out connection jack.
4.1.7
Voltage processor (Mixer / inverter / lag generator)
The voltage processor allows you to mix up to 8 inputs (audio or modulation)
to one (or several) outputs.
It also allows you to invert the input signal – a positive-going modulation (an
envelope for example) will thus become negative.
A lag generator allows you to smooth an input signal. For example, the square
signal from a LFO approximates a triangle the more we raise the potentiometer
value, increasing the lag time.
The voltage processor
8 signal inputs (input): Audio or modulation signal input connection jacks.
4 balance (mix): Sets the balance between the two input signals
4 inverters (inverter): Inverts the input signal
4 lag generators: Smoothes the input signal
4 signal outputs (output): Audio or modulation signal output connection jacks
