ARTURIA – ARP 2600 V – USER MANUAL
44
4.1.2.1
Oscillator 1
Range: General tuning of the oscillator by octaves. Up or down 4 octaves and
low frequencies
Frequency: Tuning by semi-tone (Initial Oscillator Frequency). Up or down 2
octaves
Fine tuning: Fine tune up or down by up to a semi-tone
Audio outputs: Output sawtooth & square waveform connection jacks
Sync: Synchronization of oscillator1 with 2, 3, or 2 and 3
FM Inputs: Frequency modulation input connection jacks:
•
Key follow: pre-cabled for the manual setting of the (KYBD CV)
•
Sample and hold: pre-cabled for the manual setting of the
modulation by sample and hold (S/H out)
•
ADSR Env: pre-cabled for the manual setting of the modulation by
ADSR envelope
•
Oscillator 2 Sin: pre-cabled for the manual setting of the modulation
by sine waveform of oscillator 2 (VCO2 Sin)
4.1.2.2
Oscillator 2
Range: General tuning of the oscillator by octaves. Up or down 4 octaves and
low frequencies
Frequency: Tuning by semi-tone (Initial Oscillator Frequency). Up or down 2
octaves
Fine tuning: Fine tune up or down by up to a semi-tone
Audio outputs: Connection jacks for 4 waveform outputs: triangle, sine, saw-
tooth and square
Impulse width: Impulse width for “Sawtooth”, “Square”, “Triangle” waveforms
FM Inputs: Connection jack for frequency modulation inputs:
•
Key follow: pre-cabled for manual setting of the key follow (KYBD CV)
•
ADSR Env: pre-cabled for the manual setting of modulation by ADSR
envelope
•
Sample and hold: pre-cabled for the manual setting of modulation
by sample and hold (S/H out)
•
Square oscillator 1: pre-cabled for the manual setting of modulation
by the square waveform of oscillator1 (VCO1 square)
•
Noise: pre-cabled for the manual setting of modulation of the
impulse width of the square by the noise (PWM _ noise out)
