22
INSTALLATION INSTRUCTIONS
Option 1 Cut-Out:
Option V2:
- Distance Plate material can’t be metallic. Wood or DM are advisable.
- Veneer material can’t be conductor.
1. Check if the Distance Plate fits perfectly with the monitor. The copper
cylinder can’t project outwards from the Distance Plate surface. To make
easier the adjustment the height of the copper cylinder can be barely
adjusted.
2. Clean the top surface of the metal monitor housing and the bottom
surface of the Distance Plate.
3. Glue the Veneer. Double-side tape or glue can be used (depending on
the kind of materials are going to be jointed). Double- side tape or glue
used can’t be thicker than 0,2 0,25mm [0.008 0.01]
The pressure applied
must not exceed 1 Kg
evenly distributed on
monitor surface.
