12
INSTALLATION INSTRUCTIONS
The DB2 monitor is designed to be mounted from below
the table. Included in this version are all necessary brackets.
Pattern Hole
Pattern hole dimensions for milling are specified in the corresponding
drawing. The milling of the furniture has to be done from below.
Attention
Manipulation of the product should be avoided, no stress should
be applied to the product except from the instructions given in this
document. Cutting, drilling, soldering, adding electrical and mechanical
components can cause danger and should be avoided by all means.
Not complying with these directions will result in a loss of the Arthur Holm
warranty. Albiral Display Solutions S.L. shall not be held liable for any loss
or injury incurred as a result of modifications made to goods by anyone
other than the supplier or the supplier's authorised representative with
the supplier's written permission. Such modifications shall be deemed to
terminate any further guarantee obligations.
