Arthrex Synergy AR-9800, User Manual

Page: 46 / 60

Operation and Frequently Used Functions
Synergy
RF™
User’s Guide
DFU-0221-6r0_fmt_en-US
Page 44 of 58
5.3 Footswitches
The footswitch cable connects and locks to the console to prevent
accidental separation during use. To avoid damage, always
disconnect the footswitch by pulling on the cable connector shell
(plug) only.
Figure 12 Synergy
RF
Footswitch - Description
2
Table 18 Elements of the Synergy RF Footswitch
1. Ablation button
2. Ablate power change button
3. Coag button
5.3.1 Synergy
RF
Footswitch – Ablate Power Change button
The Ablate power change button adjusts the power in the positive direction
only. Each time the button is pressed, the Ablate setting increases by 1 unit.
When the device is at maximum power setting, the user can return to the
minimum setting by pressing the Power button one more time. An audible tick is
emitted from the console for each setting unit changed. A different audible tick is
emitted from the console when the maximum setting has been reached.
If the
Ablate power change button is continuously pressed for more than 1
second then the power setting auto-increments accordingly. The power setting
will not wrap when auto-incrementing. Release the
ablate power change button
and then press it again to get the Ablate Power setting to cycle to the minimum
setting.
1 3