Arthrex Synergy AR-9800 User Manual Download Page 52

Page: 52 / 60

Technical Support

Synergy

RF™

User’s Guide

DFU-0221-6r0_fmt_en-US

Page 50 of 58

9.0 Technical Support

For assistance in using the products identified in this

User’s Guide

, contact an Arthrex

representative or call the

Arthrex Technical Support Hotline

at 1-(888) 420-9393,

Monday through Friday from 9:00 AM to 5:00 PM EST; at +49 89 909005 8800 or

[email protected]

from 8:00 AM to 5:00 PM CET.

9.1

How to Display the Software Version

Technical Support may request the software version of the console. Follow these
instructions to display the software version.

Power On the AC mains power switch [1] on the AR-9800. The
software version is displayed during the power up sequence.

Refer to Section 5.2.2 to show how to display the full software version

Summary of Contents for Synergy AR-9800





























































Search results

Summary of Contents for Synergy AR-9800

Reviews:

Related manuals for Synergy AR-9800

Brands by name

Popular brands

Arthrex Synergy AR-9800, User Manual

Search results

Summary of Contents for Synergy AR-9800

Reviews:

Related manuals for Synergy AR-9800

Brands by name

Popular brands