DrillSaw Sports 400™ System
User’s Guide
DFU-0253-4r0_fmt_en-US
Page 42 of
46
Table 22 Guidance and Manufacturer's Statement - Electromagnetic Immunity
The DrillSaw Sports 400 System is intended for use in the electromagnetic environment
specified below. The customer or the user of the DrillSaw Sports 400 System should ensure that
it is used in such an environment.
Immunity test
IEC 60601 test
level
Compliance level Electromagnetic environment -
guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
± 8kV contact
± 15 kV air
± 8 kV contact
± 15 kV air
Floors should be wood, concrete,
or ceramic tile. If floors are
covered with synthetic material,
the relative humidity should be
at least 30%.
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
30 A/m
30 A/m @ 50 & 60
Hz
Power frequency magnetic fields
should be at levels characteristic
of a typical location in a typical
commercial or hospital
environment.
Table 23 Guidance and Manufacturer's Statement - Electromagnetic Immunity (cont’d)
The DrillSaw Sports 400 System is intended for use in the electromagnetic environment
specified below. The customer or the user of the DrillSaw Sports 400 System should ensure that
it is used in such an environment.
Immunity
test
IEC 60601
test level
Compliance
level
Electromagnetic environment - guidance
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz to 2.7
GHz@ 1kHz
AM
modulation
3 V/m
Portable and mobile RF communications equipment
should be used no closer to any part of the Model
AR-400, including cables, than the recommended
separation distance calculated from the equation
applicable to the frequency of the transmitter.
Recommended separation distance
[
]
P
V
d
1
/
5
.
3
=
= 1.2
P
[
]
P
V
d
1
/
5
.
3
=
=1.2
P
80 MHz to 800 MHz
[
]
P
E
d
1
/
7
=
= 2.3
P
800 MHz to 2.5 GHz
Where
P
is the maximum output power rating of the
transmitter in watts (W) according to the transmitter
manufacturer and
d
is the recommended separation
distance in meters (m).
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site survey
a
