DrillSaw Sports 400™ System
User’s Guide
DFU-0253-4r0_fmt_en-US
Page 22 of
46
4.7
Setup - Drilling and Reaming Attachments, Keyless Chuck
These instructions describe the procedure for inserting a drill bit to the AR-400
keyless attachments.
Figure 10
Insert a drill bit into a Keyless Chuck
Table 15
Insert a drill bit into a Keyless
Chuck
1.
Open the collar of the Chuck enough for the drill bit to fit into the
attachment.
2.
Insert the drill bit. Hold the locking collar with one hand and
twist the distal end of the chuck with your other hand, until the
drill bit is firmly held in place.
1
2
