Artesyn MaxCore MC1600, Installation And Use Manual, Page: 99 / 118

Software Configuration
MC1600 Extreme Edge Server Installation and Use (6806870A02A) 97
5.2.1.4 sfptool
Included with an Extreme Edge Server installation is a CLI utility called sfptool. This utility
allows for the information status display and reconfiguration of the front panel SFP modules.
Here is the sfptool help display:
[root@mc1600-c1 ~]# sfptool -h
Usage: sfptool [-p <port>] [-spdvhrtw]
Where:
-h Help
-s Run SFP Port Scan
-p SFP Port Number: one-based number (range 1..5)
-d Dump SFP Registers for given <port>
(e.g., sfptool -p 3 -d)
-r Enable(1) or disable(0) rate select pin for a given port.
-t Enable(1) or disable(0) transmitter for a given port.
-v Verbose mode.
-w Write bytes to SFP, parm='page/offset/number/value'.
Display options include:
"-s" - display SFP status for all 5 front panel ports.
"-d" - dump register content for a specific port.
Reconfiguration options include:
"-r" - enable or disable rate select for multi-speed SFP modules.
"-t" - enable or disable the transmitter for a specific port.
"-w" - modify SFP register values, for advanced debug only.
Examples:
1. Display SFP module scan output:
[root@mc1600-c1 ~]# sfptool -s
SFP Name Pr Tx LOS TxFl SFP Info
--- ---- -- -- --- ---- ----------------------------------------------
1 xe0 1 1 1 0 speed=1G ETH AVAGO ABCU-5700RZ
2 xe1 1 1 0 0 speed=10G ETH Molex Inc. 74752-1051
3 xe2 1 1 0 0 speed=10G ETH Tyco Electronics 2032237-6
4 xe3 1 1 1 0 speed=10G ETH FINISAR CORP. FTLX1471D3BCV
5 xe4 0 0 1 1 Nothing there
[root@mc1600-c1 ~]#