Artesyn MaxCore MC1600, Installation And Use Manual, Page: 73 / 118

MC1600 Extreme Edge Server Installation and Use (6806870A02A) 71
Chapter 2
Site Preparation
2.1 Introduction
This chapter provides information on unpacking the MC1600 Extreme Edge Server, safety
precautions, and requirements for the product. Included are the environmental and power
requirements, mounting options, cooling considerations, acoustic noise control, and
dimensions and weight of the product.
2.2 Unpacking the Extreme Edge Server
Make sure you receive all items of your shipment:

One MC1600 Extreme Edge Server with PCIe filler plate

One Extreme Edge Server connector kit: two DC connectors and four crimp terminals
1. Carefully inspect the server and all shipped components.
2. Request an RMA for product return at RMASupport.ec@Artesyn.com if any damage or
discrepancies are observed with the items.
3. Tighten loose screws before proceeding.
4. Remove the desiccant bags delivered together with the system and dispose according to
your country’s legislation.
When installing or servicing the system or accessories, strictly observe the safety
precautions noted in this document. Otherwise, personal injury or property damage
may occur. Ignoring these instructions can void the system warranty.
Use ESD
protection
Attach an ESD-preventive wrist strap before operating the product. Both terminals of
the wrist strap must contact well. One terminal touches bare skin and the terminal with
the alligator clip attaches to the grounding lug at I/O panel of the system.