Artesyn Embedded Technology SharpStreamer PCIE-7207, Installation And Use Manual

Page: 84 / 118

Software Installation
SharpStreamer™ PCIE-7207 Installation and Use (6806800T60F )
84
yum install amtterm-1.3-1.el6.x86_64.rpm
OR
Get the updated amtterm source code, compile it, and install it.
wget http://www.senseless.info/downloads/amtterm-patched.tar.gz
tar zxf amtterm-patched.tar.gz
cd amtterm
./build.sh
cd amtterm-1.3
cp amtterm amttool /usr/local/bin
cd /root
rm –rf tmp
6.3.3.2 Connect to a PCIE-7207 CPU using amtterm
To view a PCIE-7207 CPU serial console using AMT SOL:
1. Log in to the host as
root
2. Use amtterm to connect to the CPU, it requires the CPU IP address, and the AMT password
for host which is set to “P@ssw0rd” for all PCIE-7207 CPUs. To connect to PCIE-7207 card
1 cpu3:
amtterm 172.20.13.100
AMT password for host 172.20.13.100:
amtterm: NONE -> CONNECT (connection to host)
ipv4 172.20.13.100 [172.20.13.100] 16994 open
amtterm: CONNECT -> INIT (redirection initialization)
amtterm: INIT -> AUTH (session authentication)
amtterm: AUTH -> INIT_SOL (serial-over-lan initialization)
amtterm: INIT_SOL -> RUN_SOL (serial-over-lan active)
serial-over-lan redirection ok
The best way to install amtterm in a CentOS 7.1 host is to get the CentOS 6.5 amtterm
and then install it using
yum
to get all the dependencies installed as well.