Artesyn Embedded Technology SharpStreamer PCIE-7207, Installation And Use Manual

Page: 83 / 118

Software Installation
SharpStreamer™ PCIE-7207 Installation and Use (6806800T60F)
83
6.3.2 Log on to a PCIE-7207 CPU
To log on to a PCIE-7207 CPU, it is necessary to log in to the host system first, then to the PCIE-
7207 CPU.
1. Log in to the host as
root
2.
ssh root@172.20.<card id><cpu>.100
3. Enter the Password as
root
6.3.3 Access a PCIE-7207 CPU via AMT
The PCIE-7207 CPUs have the AMT network enabled. The CPU console can be accessed via VNC
or SOL. The AMT password is “P@ssw0rd” for all CPUs. The following are VNC viewers which
have been verified to work with the PCIE-7207:

RealVNC
You can download it from
www.realvnc.com . It works well and requires a license for
commercial use.

vinagre
This is the standard remote desktop viewer installed with CentOS 7. It works, but it is not
the best option.
The SOL viewer has been verified to work with the PCIE-7207.
amtterm – The amtterm version is not available from the CentOS 7 repositories, but the
amtterm version available from CentOS 6.5 works in CentOS 7. An updated source version
could be downloaded from
www.senseless.info/downloads.html , it would need to be
compiled. The updated amtterm is the best option.
6.3.3.1 Installing amtterm
To install amtterm in a CentOS 7.1 host:
1. Log in to the host as
root
2. Install the CentOS 6.5 amtterm.
mkdir tmp
cd tmp
wget http://dl.fedoraproject.org/pub/epel/6/x86_64/amtterm-1.3-
1.el6.x86_64.rpm