Artesyn Embedded Technology SharpStreamer PCIE-7207 Installation And Use Manual Download Page 21 | Manualshive

Page: 21 / 118

background image

SharpStreamer™ PCIE-7207 Installation and Use (6806800T60F)

21

Sicherheitshinweise

Dieses Kapitel enthält Hinweise, die potentiell gefährlichen Prozeduren innerhalb dieses
Handbuchs vorrangestellt sind. Beachten Sie unbedingt in allen Phasen des Betriebs, der
Wartung und der Reparatur des Systems die Anweisungen, die diesen Hinweisen enthalten
sind. Sie sollten außerdem alle anderen Vorsichtsmaßnahmen treffen, die für den Betrieb des
Produktes innerhalb Ihrer Betriebsumgebung notwendig sind. Wenn Sie diese
Vorsichtsmaßnahmen oder Sicherheitshinweise, die an anderer Stelle diese Handbuchs
enthalten sind, nicht beachten, kann das Verletzungen oder Schäden am Produkt zur Folge
haben.

Artesyn Embedded Technologies ist darauf bedacht, alle notwendigen Informationen zum
Einbau und zum Umgang mit dem Produkt in diesem Handbuch bereit zu stellen. Da es sich
jedoch um ein komplexes Produkt mit vielfältigen Einsatzmöglichkeiten handelt, können wir
die Vollständigkeit der im Handbuch enthaltenen Informationen nicht garantieren. Falls Sie
weitere Informationen benötigen sollten, wenden Sie sich bitte an die für Sie zuständige
Geschäftsstelle von Artesyn.

Das System erfüllt die für die Industrie geforderten Sicherheitsvorschriften und darf
ausschließlich für Anwendungen in der Telekommunikationsindustrie und im Zusammenhang
mit Industriesteuerungen verwendet werden.

Einbau, Wartung und Betrieb dürfen nur von durch Artesyn ausgebildetem oder im Bereich
Elektronik oder Elektrotechnik qualifiziertem Personal durchgeführt werden. Die in diesem
Handbuch enthaltenen Informationen dienen ausschließlich dazu, das Wissen von
Fachpersonal zu ergänzen, können dieses jedoch nicht ersetzen.

Halten Sie sich von stromführenden Leitungen innerhalb des Produktes fern. Entfernen Sie auf
keinen Fall Abdeckungen am Produkt. Nur werksseitig zugelassenes Wartungspersonal oder
anderweitig qualifiziertes Wartungspersonal darf Abdeckungen entfernen, um Komponenten
zu ersetzen oder andere Anpassungen vorzunehmen.

Installieren Sie keine Ersatzteile oder führen Sie keine unerlaubten Veränderungen am Produkt
durch, sonst verfällt die Garantie. Wenden Sie sich für Wartung oder Reparatur bitte an die für
Sie zuständige Geschäftsstelle von Artesyn. So stellen Sie sicher, dass alle
sicherheitsrelevanten Aspekte beachtet werden.

«
...
19
20
21
22
23
...
»

Summary of Contents for SharpStreamer PCIE-7207























































































































Reviews:

No comments

Related manuals for SharpStreamer PCIE-7207

Mobile Video System

Brand: Farenheit Pages: 51

Brand: Global VR Pages: 48

Brand: Nav TV Pages: 7

ULTRA COMM+I.LPCI

Brand: SeaLevel Pages: 19

Brand: Bosch Pages: 54

Brand: Bosch Pages: 80

Brand: Bosch Pages: 142

Brand: Bosch Pages: 200

Brand: HP Pages: 17

Brand: HP Pages: 16

Intel HD Graphics 2500

Brand: HP Pages: 10

nVIDIA GeForce2 MX p2289a

Brand: HP Pages: 22

Brand: HP Pages: 4

NVIDIA Quadro FX 1400

Brand: HP Pages: 2

NVIDIA Quadro FX 1700

Brand: HP Pages: 2

Brand: NavLinkz Pages: 23

Brand: Broadcom Pages: 16

Brand: Broadcom Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands