Artesyn Embedded Technology 6806800U78A Installation And Use Manual Download Page 36 | Manualshive

Page: 36 / 94

background image

Hardware Preparation and Installation

SharpStreamer™ Pro Mini PCIE-7210-1 Installation and Use (6806800U78A

)

36

2.4

PCIE-7210-1 Card Installation and Removal

This section contains the PCIE-7210-1 card installation and removal procedures.

2.4.1

PCIE-7210-1 Card Installation

To install the PCIE-7210-1 card, perform the following steps:

1. Use anti-static pads and attach an ESD strap to your wrist. Attach the other end of the ESD

strap to an electrical ground (For more details, refer to the section

2. Remove the server cover.

Shipping the card along with a server is not recommended.
If you still need to ship the card along with the server, ensure the card is properly
secured in the server. Check if necessary precautions were followed to keep the card
resistive against wobbling. Otherwise, there are chances of card getting damaged.
For more information about securing the PCIe card in a server, refer to MaxCore
product documentation.

You must allow the card to cool for 30 minutes, before removing it. In case you try to
touch the card, the heat sink could be hot enough to burn your skin.

For detailed information about the PCIe card installation, refer to respective server
manufacturer’s product documentation.

«
...
34
35
36
37
38
...
»

Summary of Contents for 6806800U78A































































































Reviews:

No comments

Related manuals for 6806800U78A

Brand: Aastra Pages: 2

ARM Cortex-A9 MPCore

Brand: Dave Embedded Systems Pages: 67

Brand: Garland Pages: 4

Brand: TC-Helicon Pages: 2

Brand: Yaesu Pages: 2

Brand: CSS Pages: 2

Brand: Endace Pages: 51

Brand: Pressalit Care Pages: 31

Brand: C&T Solution Pages: 129

UniFi WiFi BaseStation XG

Brand: Ubiquiti Pages: 19

Emotron OSTO 100

Brand: CG Pages: 112

Brand: Hauppauge Pages: 62

Brand: ekwb Pages: 11

Brand: Softing Pages: 16

Acme Packet 3900

Brand: Oracle Pages: 70

TeleLite 720920 Series

Brand: Positron Pages: 21

iConverter GX/F

Brand: Omnitron Systems Technology Pages: 2

Brand: Jennic Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands