Artesyn Embedded Technology 6806800U29D, Installation And Use Manual

Page: 99 / 144

Base Operating System
SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D)
99
Boot the PCIE-7210 card
1. Press < ESC > key during BIOS booting.
2. Select Boot Manager and select the EFI network to Boot From.
3. Login as
root / root
. For more information on how to connect the console, refer to the
section Linux Distribution on page 104 .
6.2.4 Installation
You can install software in two ways, either by automatic installation or by manual installation.
Prerequisites
The following are the prerequisites for software installation onto a disk:

BIOS must be set to UEFI mode.

Bootable USB drive or PXEboot (source from which software is installed).

Disk for installation
– USB drive or SD card
– iSCSI based disk
Note : Disk should have at least 8GB space.

Installable files [available on ISO/bootable USB drive in /images directory]:
–
files.sha1sum
–
vmlinuz
–
ramfs.gz

USB Hub to connect multiple USB devices (in case the installation disk is a USB).
Installation Procedure
1. Connect the installable disk (USB/SD card).
2. Change the BIOS mode to UEFI.
3. Boot the card with bootable USB drive or through PXEboot.
4. Login. For more information, refer to the section Linux Distribution on page 104 .