Artesyn Embedded Technology 6806800U29D, Installation And Use Manual

Page: 18 / 144

SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D)
Safety Notes
18
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense. Changes or
modifications not expressly approved by Artesyn Embedded Technologies could void the
user's authority to operate the equipment. Board products are tested in a representative
system to show compliance with the above mentioned requirements. A proper installation in
a compliant system will maintain the required performance. Use only shielded cables when
connecting peripherals to assure that appropriate radio frequency emissions compliance is
maintained.
Operation
Product Damage
Surface of the Product
High humidity and condensation on the product surface causes short circuits.
Do not operate the product outside the specified environmental limits. Make sure the product
is completely dry and there is no moisture on any surface before applying power.
Overheating and Product Damage
Operating the product without forced air cooling may lead to overheating and thus damage of
the product.
When operating the product, make sure that forced air cooling is available in the enclosure.
Data Corruption
If power to the unit is removed while a firmware update is in progress to the card flash memory,
the changes will not be saved, and worse, the flash memory may be corrupted. In such case the
card is likely to remain in non-operable state and will require reconditioning by qualified repair
services.