Artesyn Embedded Technology 6806800U29D, Installation And Use Manual

Page: 34 / 144

Hardware Preparation and Installation
SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D )
34
2.3 Precautions

To reduce the risk of personal injury, fire, or damage to the equipment, do not
overload the AC supply circuit that provides power to the chassis.

The card must be powered and connected only to a controlled voltage source.

To avoid shock, make sure that the power cables are connected to a properly wired
and grounded receptacles.
Electrostatic Discharge
Do not touch the circuit with bare hands.
The static electricity of the human body may damage the ElectroStatic Sensitive
Devices (ESSDs) on the circuit.
Make sure that you wear an ElectroStatic Discharge (ESD) preventive wrist strap or
antistatic glove to prevent the static electricity from hurting you or damaging the
device.
Keep your personal objects such as your clothes away from the system. To prevent the
static electricity from damaging the device, it is recommended to wear antistatic
clothes.
Pin Damage
If the is not fully aligned with the interface in the backplane, too much force may twist
the pins on the card or backplane.
Do not exert too much force when you insert the card.