Artesyn Embedded Technology 6806800U29D, Installation And Use Manual

Page: 96 / 144

Base Operating System
SharpStreamer™ Pro PCIE-7210 Installation and Use ( 6806800U29D )
96
4. Select the following options in
rufus
.
5. Click the CDROM button and provide the location of the ISO file.
6. Click Start . It takes 2-5 minutes of time to copy and a green bar would be displayed.
7. Remove the USB drive from the system and then connect it to the card via USB1 / USB2
ports (based on the corresponding CPUs) on the faceplate.
8. Go to BIOS Setup menu and perform the following steps:
a. Select UEFI mode.
b. Select the USB drive as the first bootable drive.
c. Save and exit.
6.2.3 Booting via PXEboot
Prerequisites

Linux host that acts as TFTP and DHCP server to serve PCIE-7210 PXEboot.

Enable Network Stack and PXE Boot Capability on BIOS Setup > BOOT menu. By default,
the Network stack and PXE Boot Capability in BIOS are disabled.
Option Selection
Device Select the USB drive that you have inserted.
Partition scheme and
target system type GPT partition scheme for UEFI
File System Fat32
Cluster Size 8192 bytes
New Volume Label PCIE7210-BOOT
Format options Quick format
Create a bootable disk using