Arteche saTECH RIO, User Manual

Page: 10 / 27

SECURITY MEASURES
saTECH RIO | User´s Manual | Rev. 1.0
10
Chapter 2. Security Measures
The saTECH RIO must only be handled by qualified personnel. Incorrect
handling can cause injury and damage to the units and/or the facilities
saTECH RIO
must be disconnected or “de-energised” before opening.
Contact with hazardous voltages and currents inside this equipment can
cause, among others, electric shocks resulting in injury or death.
saTECH RIO must always be connected to a protective earth during
normal operating conditions, tests, demonstrations or any situation in
which it is to be energized. The use of the unit without proper grounding
can cause damage to saTECH RIO, as well as injuries in the event of an
accident.
Never connect or disconnect a cable and/or connector to/from a saTECH
RIO during normal operation. Existing dangerous currents and voltages
can be lethal. Operation may be interrupted and the saTECH RIO and the
measurement circuit may be damaged.
The saTECH RIO
’s electronic circuits may be damaged if exposed to static
electricity (ESD). To avoid injury, always avoid touching the circuitry when
the covers are removed.
When the covers are removed the voltage circuits are exposed. Do not
touch the circuits while they are operating. The voltages and currents
present can cause death.
Contact with the terminals of the measuring instruments can cause
electrical shocks that can result in injury or death. Always use insulated
test poles when measuring signals in an open circuit.