![background image](http://html1.mh-extra.com/html/arteche/satech-rio/satech-rio_user-manual_2977390013.webp)
INSTALLATION
saTECH RIO
|
User´s
Manual | Rev. 1.0
13
Chapter 4. Installation
The unit should be installed in premises with environmental and electrical conditions suitable
for the saTECH RIO, taking into account the characteristics of its hardware. Areas with
excessive dust and damp should be avoided.
The saTECH RIO
is ready for assembly in a 19” rack, its height is 88.90 mm (2U). Sufficient
space must be left both at the front and at the back for connections, maintenance tasks and for
changing modules.
4.1. Assembly
The saTECH RIO is ready
for mounting in a 19” rack. This is done using 4 sets of M6
screws, plastic washers and M6 cage nuts, which are to be assembled as shown in the
following diagram.
A Phillips M6 screwdriver or similar screwdriver is to be used to fix the unit to the rack
securely.
Figure 4.
Mounting in 19” rack.
Summary of Contents for saTECH RIO
Page 1: ...saTECH RIO User s Manual...
Page 27: ...www arteche com Arteche...