![background image](http://html1.mh-extra.com/html/arteche/satech-rio/satech-rio_user-manual_2977390019.webp)
WIRING
saTECH RIO
|
User´s
Manual | Rev. 1.0
19
6.4. DC digital and analogue capture inputs/outputs
DC digital and analogue capture inputs/outputs: 18-pin terminal block with 5.08mm pitch.
Clamping section with minimum and maximum connections of 0.13 mm2 and 4 mm2,
respectively, and minimum and maximum AWG conductor connection sections of 30 and 12,
respectively. The different types of connection, depending on the module chosen, are
described below. It must be remembered that there are two types of module (bus and
expander), but that this is not important when they are being connected.
Figure 8
.
16 opto isolated digital input modules with independent common.
Figure 9.
32 opto isolated digital input modules with independent common each 8 inputs.
Figure 10.
16 electromechanical relay digital output modules
Figure 11.
16 opto isolated digital input modules with independent common each 8 inputs, plus 8
electromechanical relay digital outputs.
Summary of Contents for saTECH RIO
Page 1: ...saTECH RIO User s Manual...
Page 27: ...www arteche com Arteche...