Page 6 · 234B Series TEC TO-Can
LaserMount
User’s
Manual
Face of 234B with cover off
Connect to Laser Diode Driver and TEC Controller:
Next, connect the
234B
to
your laser diode driver and temperature controller.
NOTE
Arroyo Instruments offers Laser and TEC cables designed to connect
directly between our
LaserSource
and
TECSource
products. If you
use your own cables, ensure the connections are properly made
between the instrument and the mount, and that proper grounding
techniques are used. The pin-out of the connectors can be found later
in this document.
WARNING
Be sure you are properly ESD protected before handling your laser. For
additional information, read the section titled “Laser Diode Protection”
later in this manual.