Page 8 · 234B Series TEC TO-Can
LaserMount
User’s
Manual
When tightening the screws, do not over tighten, which may strip the threads.
Do not tighten one side more than the other, as poor or uneven temperature
control may result; the two pictures below show a correct and improper use of
the diode clip:
GOOD: Diode properly clamped,
BAD: Diode improperly clamped,
clip is even with cold plate
clip is uneven with cold plate
The photos below illustrate the various covers and clips:
Standard cover plate
Optional 234-C-02 cover plate
1mm offset cover plate
