38
●
Parts Needed For
●
Trim 12x17, 12x24 & 12x31
Step 26
BW38
●
●
●
●
●
5220 Side Roof Trim (see below)
●
●
●
●
●
6014 Side Roof Trim (2)
●
●
●
●
●
7845 Left Rack (2)
●
●
●
●
●
7846 Right Rake (2)
STEP
6
STEP
2
STEP
1
STEP
4
STEP
3
1
Attach the side roof trim to the
lower end of the roof panels on each
side of the building using screws at
each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2
Position left and right rake to the
ends of roof, noting that rake slips
under ridge cap, but fits on top of side
roof trim. Fasten rake to the center of
roof panel rib using a bolt.
3
Fasten roof panel rib, rake, peak
cap and ridge cap together using
bolts and nuts. Fasten remaining
peak cap in the same manner.
4
Using your thumb and index finger,
overbend the bottom flange of the
side roof trim at the corner inward
enough so the right and left roof trim
caps fit onto right and left corners.
5
Fasten rake to side trim using a
screw into roof panel.
6
Fasten the roof trim caps to the side
trim using a screw.
IF YOU ARE BUILDING A 12x24
Install additional side roof trim 5220 towards
rear of building.
IF YOU ARE BUILDING A 12x31
Install 2 additional side roof trim 5220 pieces
towards rear of building.
STEP
5
