Each wall panel has a crimped rib on
1 side. The crimped rib should go
under the rib of the panel that follows
it. Leave out 1 main wall panel at the
side or rear entry door location.
1
Fasten the main wall panels at the
top and bottom with screws.
2
Fasten center of each panel to the
mid frames with screws. Fasten over-
lapping ribs using 2 screws and a
bolt with nut at the center.
3
At the rear center of the building,
fasten the medium wall panel in the
same manner.
Step 11
BW24
●
Parts Needed For
●
Walls All Sizes
●
●
●
●
●
7822 Main Wall Panel (see below)
●
●
●
●
●
7823 Medium Wall Panel (1)
24
STEP
3
STEP
1
IF YOU ARE BUILDING A 12x24
Install 3 additional main wall panels on
each side of the building.
IF YOU ARE BUILDING A 12x31
Install 6 additional main wall panels on
each side of the building.
7823
#8Ax5/16" Screw
Crimped Rib
Underneath
At the truss columns, fasten rib with bolt,
washer & nut before screws are installed.
Detail Showing
Center of Panel Screwed
to Side Frame
Bolt and nut
does not go
thru side frame
at overlap
7822
#10-32 Square Nut
#10-32x7/16" Screw
Washer
SCREWS TO FRAME
MEDIUM WALL PANEL
SCREW
TO RIB
BOLT TO
PANEL
SCREW
TO RIB
SCREWS TO FRAME
WIDE RIB
NARROW RIB
(HAS BEAD)
SCREWS TO
FRAME
STEP
2
