The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
1
Fasten front columns to the bot-
tom and mid front frames with bolts
and nuts. Flange with 2 holes at each
end must be facing outside. Fold
front panel slightly away from column
to tighten bolts and nuts.
2
Fasten right and left front frame
to the top of front wall panels using 4
screws.
3
Position lintel across top of frames
and columns and fasten with bolts.
4
Position rear frame assembly
across top of main wall panels and
fasten using screws.
Step 10
BW23
●
Parts Needed For
●
Frames
12x17, 12x24 & 12x31
●
●
●
●
●
Rear Frame Assembly (1)
●
●
●
●
●
7915 Side Top Angle (see below)
●
●
●
●
●
7838 Side Top Angle (2)
●
●
●
●
●
7958 Door Track (1)
23
#10-32 Square Nut
STEP
2
STEP
3
STEP
1
5
Fasten side top angles 7915 to
the truss column using a screw and to
rear corner panels using screws.
6
Fasten side top angles 7838
under 7915 and fasten to front corner
panels using screws. Fasten over-
lap (2 1/2" 6cm) with 2 bolts and nuts.
Side angles overlap front and rear
frames in the corners. Fasten sup-
port column to side top angle using a
bolt and nut.
7
Position door track to the inside of
side top angle, butted up against sup-
port column. With short flange of
track at bottom, fasten angle to track
using 4 screws at the 2nd, 3rd, 4th
and 5th hole in from support column.
See Step 12 for rear door installation.
●
●
●
●
●
7839 Front Column (2)
●
●
●
●
●
7834 Right Front Frame (1)
●
●
●
●
●
7835 Left Front Frame (1)
●
●
●
●
●
7831 Lintel (1)
7958
IF YOU ARE BUILDING A 12x24
Repeat side top angle assembly using 2
additional angles 7915.
IF YOU ARE BUILDING A 12x31
Repeat side top angle assembly using 4
additional angles 7915.
8531
8532
7915
7838
7834
7831
7839
7839
7835
#8Ax5/16" Screw
#10-32 x7/16" Bolt
INSIDE
2 HOLES
STEP
3
FRONT OF
BUILDING
FACING
INSIDE
STEP
4
STEP
6
STEP
5
STEP
7
SIDE TOP
ANGLE
LONG
FLANGE
SHORT
FLANGE
TRACK
INSIDE
2 HOLES
