43
●
Parts Needed For
●
Vertical Tracks Roll-Up-Door
Step 31
BW43
●
●
●
●
●
67510 Right Vertical Track (1)
●
●
●
●
●
67509 Left Vertical Track (1)
STEP
2
STEP
1
STEP
4
STEP
3
NOTE
When rib neck bolts are inserted
in the track, use bolts with heads
located on the inner side of the
track to prevent interference with
the movement of the rollers.
1
Insert the roller shaft into the barrel
holes on the hinges furthest out from
the face of the end stiles on both
panels. Note that #1 hinge has only
one barrel. Insert rollers through the
tabs on the bottom brackets on bot-
tom section.
2
Attach right and left vertical tracks
loosely to right and left track supports
using 1/4-20x1/2" hex head bolts and
square nuts.
3
Attach spring latch strikers loosely
to vertical tracks using 1/4-20x1/2"
rib neck bolts and square nuts.
4
Lift the bottom section and insert
the rollers into the vertical tracks. Slide
the panel down and level across top.
Shim to level if necessary.
5
Insert lock section into vertical
tracks. Attach hinges from #1 to #2
panel by inserting #10Bx1/2" truss
head screws at bottom edge of lock
section. Do not fasten the last door
panel at this time.
STEP
5
