Parts Needed For
Gables/Roof Beams
Step 11
M24
Left Gable Assemblies (2)
Right Gable Assemblies (2)
Single Roof Beam (4)
6636 Gable Brace (2)
1
Lift and fasten a right and left gable,
under angle at corner, to the door
track and rear wall angle with screws.
Hint: On the front gable, leave out 2
screws closest to center gable leg.
On the rear gable, use a bolt and nut
at the overlapping rear wall angle.
2
Fasten the single roof beam, small
holes on top, to the outer gable leg
and mid gable brace as shown using
bolts and nuts.
Repeat Step 1 for the opposite side
of building.
3
Join the left and right gables
together with a gable brace using
a bolt in the second hole from the
bottom only. Do this step for both
front and rear gables.
Repeat Step 2 for the opposite side
of building.
STEP
3
6636 Gable Brace
STEP
1
Single Roof Beam Assembly
STEP
2
Gable
24
